Cool Tie To Go - Nature Prints Cooling Neck Wraps
Cool Tie To Go - Nature Prints Cooling Neck Wraps
Click on the "Related Products" to browse our fabric options.
Mix and Match Solids and Prints.
Add your selections to your cart.
Shipping calculated at checkout.
Couldn't load pickup availability
Discount Bundles
Discount Bundles
- Mix and Match Solids and Prints
- 10% Discount Starting at 1 Dozen
- 15% Discount Starting at 2 Dozen
- Special orders of 3 Dozen or more - Contact Us using the form below for a quote.
What is "Cool Tie To Go"
What is "Cool Tie To Go"
"Cool Tie To Go" is a cool-wearing accessory containing special water absorbing crystals that work effectively to cool the body when you work or play in the heat. To charge your Cool Tie simply soak the dry tie in clean water for 30 to 40 minutes and it's ready for the day. Each polymer crystal sewn in the tie will expand by absorbing 200 times its weight in water thus charging the tie. The fabric dries to the touch but stays cool and keeps on cooling by the process of evaporation. It's reusable day after hot day. Only short soakings are necessary to recharge your Cool Tie after the initial soaking. When your are not wearing it just store your Tie in the refrigerator or hang it over a towel bar and the crystals will dry to their natural state. You can choose from a large selection of solid colors and prints.
Use the "Contact Us" form for any questions.
Order Yours Today!!!
Shipping
Shipping
Domestic Orders:
Orders less than 3 Dozen:
- Free Economy Shipping
- $9.95 Priority Shipping
- Special Orders of 3+ Dozen Please Contact Us for rate quotes
CANADA
- 8 ounces - $5.99 USD
- 1 pound - $8.99 USD
- 2 pounds - $12.99 USD
- 3 pounds - $16.99 USD
- 4 pounds - $23.99 USD
- Delivery time varies from 7 to 23 days
- We DO NOT collect any VAT, Duties or Import Taxes.
MEXICO
- 8 ounces - $8.99 USD
- 1 pound - $12.99 USD
- 2 pounds - $16.99 USD
- 3 pounds - $23.99 USD
- 4 pounds - $32.99 USD
- Delivery time varies from 7 to 23 days
- We DO NOT collect any VAT, Duties or Import Taxes.
Cool Tie Care Instructions
Cool Tie Care Instructions
Cool Tie Care Instructions
Charging Your Cool Tie
- Carefully remove staples as to not tear the plastic.
- Remove your Cool Tie and spread the crystals as evenly as possible throughout the center section.
- Place tie into plastic bag and add enough water to fill the bag approximately half full. DO NOT OVERFILL THE BAG.
- Zip the bag closed and wait about 10 minutes.
- Reopen the bag being careful to not spill the remaining water.
- Spread gel evenly through the center section of the tie.
- Place tie back into the plastic bag and seal.
- Remove the tie from the bag after about another 10 to 20 minutes or until all the water in the bag has been absorbed.
- You are ready to go!
- Note: Only short soakings are necessary after initial charge.
Care Instructions
- Hand wash quickly in mild soapy water. Rinse thoroughly.
- Your Cool Tie can be re-used over and over again.
- When not in use hang to dry or store in the refrigerator.
DO NOT OVER SOAK
DO NOT STORE IN A CLOSED CONTAINER OR PLASTIC BAG WHEN WET
DO NOT FREEZE
DO NOT INGEST
NOTE: Some colors may bleed during the first soaking. Rinse before wearing if bleeding occurs.
Acrylic Polymer Crystals Information
Acrylic Polymer Crystals Information
Information For Super Absorbent Polymers used in the product "CooL Tie"
Specified as Non-Hazardous in accordance with 29CFR 1910-1200
Identification of the product
1. Composition/Information on Ingredients
Identification of the preparation: polyacrylamide
2. Hazards Identification
The product when wet renders surfaces extremely slippery.
The product swells in water.
3. First Aid Measures
Inhalation: No hazards which require special first aid measures.
Skin contact: No hazards which require special first aid measures.
Eye contact: Rinse thoroughly with plenty of water, also under the eyelids. In case of persistent eye irritation, consult a physician.
Ingestion: The product is not considered toxic based on studies on laboratory animals.
4. Accidental Release Measures
Personal precautions: No special precautions required.
Environmental precautions: Do not contaminate water used with the product.
Methods for cleaning up: Clean up by scoop or vacuum. Keep in suitable and closed containers. After cleaning, flush away traces with water.
5. Handling and Storage
Skin protection: No special protective clothing required.
Hygiene measures: Wash hands before breaks and at the end of workday. Handle in accordance with good industrial hygiene and safety practice.
6. Physical and Chemical Properties
Form: Granular solid
Color: White
Odor: None
Melting point (ºC): Not applicable
Flash point (ºC): Not applicable
Auto ignition temperature (ºC): Not applicable
Vapor pressure (mm Hg): Not applicable
Water solubility: Insoluble
7. Stability and Reactivity
Stability: Product is stable, No hazardous polymerization will occur.
Conditions to avoid: No special precautions required.
Materials to avoid: The product swells in water.
8. Toxicological Information
Acute toxicity
- Oral: Not toxic: LD50/oral/rat > 5000 mg/kg
- Dermal: Not toxic: LD50/dermal/rabbit > 200mg/kg
Irritation
- Skin: Not irritating.
- Eyes: Moderate eye irritation due to effects all powders have on conjunctivae.
Sensitization: Not sensitizing.
9. Ecological Information
Ecotoxicity: Ecological injures are not know or expected under normal use. Aquatic toxicity is unlikely due to low solubility.
Persistence / degradability: Not readily biodegradable, < 10% after 28 days.
10. Transport Information
Not regulated by DOT
11. Regulatory Information
All components of this product are on the TSCA and DSL inventories
RCRA status: Not a hazardous waste.
Hazardous waste number: Not applicable
Reputable quantity (40 CFR 302): Not applicable
Threshold planning quantity (40 CFR 302):
Not applicable
HMIS & NFPA Ratings HMIS NFPA
Health: 1 1
Flammability: 1 1
Reactivity: 0 0
12. SAFE HANDLING INFORMATION
_______________________________________________________________
STORAGE AND TRANSPORT: Product is not a transport hazard. Avoid extremes of temperature, wet, damp or humid conditions.
SPILLS AND DISPOSAL: Granules can be swept up and used or disposed of. If material has been wet and a gel has formed it should be contained with sand or earth. Dispose at a landfill site.
FIRE/EXPLOSION HAZARD: Although product is non-flammable as with many organic powders, flammable dust clouds may be formed. Avoid creating dust and keep away from sources of ignition. If involved in a fire use carbon dioxide, dry powder or foam in preference to water spray.
OTHER INFORMATION: Spilled product can be very slippery if it becomes wet.
Specified as Non-Hazardous in accordance with 29CFR 1910-1200
Identification of the product
1. Composition/Information on Ingredients
Identification of the preparation: polyacrylamide
2. Hazards Identification
The product when wet renders surfaces extremely slippery.
The product swells in water.
3. First Aid Measures
Inhalation: No hazards which require special first aid measures.
Skin contact: No hazards which require special first aid measures.
Eye contact: Rinse thoroughly with plenty of water, also under the eyelids. In case of persistent eye irritation, consult a physician.
Ingestion: The product is not considered toxic based on studies on laboratory animals.
4. Accidental Release Measures
Personal precautions: No special precautions required.
Environmental precautions: Do not contaminate water used with the product.
Methods for cleaning up: Clean up by scoop or vacuum. Keep in suitable and closed containers. After cleaning, flush away traces with water.
5. Handling and Storage
Skin protection: No special protective clothing required.
Hygiene measures: Wash hands before breaks and at the end of workday. Handle in accordance with good industrial hygiene and safety practice.
6. Physical and Chemical Properties
Form: Granular solid
Color: White
Odor: None
Melting point (ºC): Not applicable
Flash point (ºC): Not applicable
Auto ignition temperature (ºC): Not applicable
Vapor pressure (mm Hg): Not applicable
Water solubility: Insoluble
7. Stability and Reactivity
Stability: Product is stable, No hazardous polymerization will occur.
Conditions to avoid: No special precautions required.
Materials to avoid: The product swells in water.
8. Toxicological Information
Acute toxicity
- Oral: Not toxic: LD50/oral/rat > 5000 mg/kg
- Dermal: Not toxic: LD50/dermal/rabbit > 200mg/kg
Irritation
- Skin: Not irritating.
- Eyes: Moderate eye irritation due to effects all powders have on conjunctivae.
Sensitization: Not sensitizing.
9. Ecological Information
Ecotoxicity: Ecological injures are not know or expected under normal use. Aquatic toxicity is unlikely due to low solubility.
Persistence / degradability: Not readily biodegradable, < 10% after 28 days.
10. Transport Information
Not regulated by DOT
11. Regulatory Information
All components of this product are on the TSCA and DSL inventories
RCRA status: Not a hazardous waste.
Hazardous waste number: Not applicable
Reputable quantity (40 CFR 302): Not applicable
Threshold planning quantity (40 CFR 302):
Not applicable
HMIS & NFPA Ratings HMIS NFPA
Health: 1 1
Flammability: 1 1
Reactivity: 0 0
12. SAFE HANDLING INFORMATION
_______________________________________________________________
STORAGE AND TRANSPORT: Product is not a transport hazard. Avoid extremes of temperature, wet, damp or humid conditions.
SPILLS AND DISPOSAL: Granules can be swept up and used or disposed of. If material has been wet and a gel has formed it should be contained with sand or earth. Dispose at a landfill site.
FIRE/EXPLOSION HAZARD: Although product is non-flammable as with many organic powders, flammable dust clouds may be formed. Avoid creating dust and keep away from sources of ignition. If involved in a fire use carbon dioxide, dry powder or foam in preference to water spray.
OTHER INFORMATION: Spilled product can be very slippery if it becomes wet.
